304 316 Dhuumaha birta ah ee Honed Pneumatic Sylinder
Tilmaamaha
| Cabbirka | Tilmaamaha | |||||||
| ID | Dulqaadka | OD | Dulqaadka | Dhumucda | Wareegid | Toosanaan | Oogada gudaha dhammayn | |
| φ6xφ7 | 6 | 0.04/0 | 7 | ±0.05 | 0.5 | 0.03 | 1.5mm/m | Ra≤0.4μm |
| φ8xφ9 | 8 | 0.04/0 | 9 | ±0.05 | 0.5 | 0.03 | 1.5mm/m | Ra≤0.4μm |
| φ10xφ11 | 10 | 0.04/0 | 11 | ±0.05 | 0.5 | 0.03 | 1.2mm/m | Ra≤0.4μm |
| φ10xφ11.25 | 10 | 0.04/0 | 11.25 | ±0.05 | 0.63 | 0.03 | 1.2mm/m | Ra≤0.4μm |
| φ10xφ11.8 | 10 | 0.07/0 | 11.8 | ±0.1 | 0.9 | 0.03 | 1mm/m | Ra≤0.4μm |
| φ11.8xφ13.8 | 11.8 | 0.07/0 | 13.8 | ±0.1 | 1 | 0.03 | 1mm/m | Ra≤0.4μm |
| φ12xφ13.4 | 12 | 0.05/0 | 13.4 | ±0.05 | 0.7 | 0.03 | 1.2mm/m | Ra≤0.4μm |
| φ14.3xφ16.3 | 14.3 | 0.07/0 | 16.3 | ±0.1 | 1 | 0.03 | 1mm/m | Ra≤0.4μm |
| φ16xφ17.4 | 16 | 0.05/0 | 17.4 | ±0.05 | 0.7 | 0.03 | 1mm/m | Ra≤0.4μm |
| φ20xφ21.4 | 20 | 0.06/0 | 21.4 | ±0.05 | 0.7 | 0.04 | 1mm/m | Ra≤0.4μm |
| φ25xφ26.4 | 25 | 0.06/0 | 26.4 | ±0.05 | 0.7 | 0.04 | 1mm/m | Ra≤0.4μm |
| φ32xφ33.6 | 32 | 0.07/0 | 33.6 | ±0.05 | 0.8 | 0.05 | 1mm/m | Ra≤0.4μm |
| φ40xφ41.6 | 40 | 0.07/0 | 41.6 | ±0.05 | 0.8 | 0.05 | 1mm/m | Ra≤0.4μm |
| φ50xφ52 | 50 | 0.06/0 | 52 | ±0.07 | 1 | 0.05 | 1mm/m | Ra≤0.4μm |
| φ63xφ65 | 63 | 0.06/0 | 65 | ±0.07 | 1 | 0.05 | 1mm/m | Ra≤0.4μm |
| φ16xφ18 | 16 | 0.05/0 | 18 | ±0.05 | 1 | 0.03 | 1mm/m | Ra≤0.4μm |
| φ20xφ22.8 | 20 | 0.06/0 | 22.8 | ±0.05 | 1.4 | 0.04 | 1mm/m | Ra≤0.4μm |
| φ25xφ27.8 | 25 | 0.06/0 | 27.8 | ±0.05 | 1.4 | 0.04 | 1mm/m | Ra≤0.4μm |
| φ32xφ35 | 32 | 0.07/0 | 35 | ±0.05 | 1.5 | 0.05 | 1mm/m | Ra≤0.4μm |
| φ40xφ43 | 40 | 0.07/0 | 43 | ±0.05 | 1.5 | 0.05 | 1mm/m | Ra≤0.4μm |
Dhuumaha birta ah waa bir wareeg ah oo godan, kaas oo si weyn loogu isticmaalo batroolka, kiimikaadka, caafimaadka, cuntada, warshadaha iftiinka, mishiinada iyo qalabka iyo dhuumaha gaadiidka kale ee warshadaha iyo qaybaha dhismaha farsamada.Intaa waxaa dheer, marka foorarsiga iyo xoogga torsion ay isku mid yihiin, miisaanku waa ka fudud yahay, sidaas darteed waxaa sidoo kale si ballaaran loo isticmaalaa soo saarista qaybaha farsamada iyo dhismayaasha injineernimada.Waxa kale oo inta badan loo isticmaalaa sida alaabta guriga iyo maacuunta jikada.
Waxaan haynaa 2 nooc oo ah tuubo silinder ah oo bir ah, kaas oo ah 316L iyo 304 darajo.
FAQ:
Q1: Waa maxay faraqa u dhexeeya 304 Fasalka iyo 316 Fasalka?
A:
| Darajooyinka | C max | Mn max | P max | S max | Si max | Cr | Ni | Mo |
| 304 | 0.08 | 2 | 0.04 | 0.03 | 0.075 | 18.00-20.00 | 8.00-11.00 | / |
| 316 | 0.8 | 2 | 0.04 | 0.03 | 0.075 | 16.00-18.00 | 11.00-14.00 |
Q2: Waa maxay faraqa u dhexeeya 304, 304L, 316, 316L?
A:
| Guryaha Makaanikada | |||||
| Darajooyinka | Shayga | Xasilloonida Psi | Soo saarista Psi | Dheeraynta% | Rockwell Hardness |
| 304 | La xiray | 85000-105000 | 35000-75000 | 20-55 | 80-95 |
| 304L | AnnealedI1/8 adag | 85000-105000 | 35000-75000 | 20-55 | 75-95 |
| 316 | La xiray | 85000min | 35000min | 50min | 80min |
| 316L | La xiray | 80000min | 30000min | 50min | 75min |
| Darajooyinka | C max | Mn max | P max | S max | Si max | Cr | Ni | Mo |
| 304 | 0.08 | 2 | 0.04 | 0.03 | 0.075 | 18.00-20.00 | 8.00-11.00 | / |
| 304L | 0.035 | 2 | 0.04 | 0.03 | 0.075 | 18.00-20.00 | 8.00-13.00 | / |
| 316 | 0.08 | 2 | 0.04 | 0.03 | 0.075 | 16.00-18.00 | 11.00-14.00 | 2.00-3.00 |
| 316L | 0.035 | 2 | 0.04 | 0.03 | 0.075 | 16.00-18.00 | 10.00-15.00 | 2.00-3.00 |
Q3: Waa kuwee dhululubada Pneumatic loo baahan yahay in laga sameeyo tuubooyinka dhululubada pneumatic ahama-birta
A: MA, DSNU Pneumatic dhululubo leh tuubo dhululubo ahama.
Q4: Ma haysaa dhululubada pneumatic birta ah oo buuxa?
J: Haa, waan haynaa.Waa alaab la habeeyey.Guud ahaan, waxaa loo isticmaalaa iyadoo ku habboon heerka cuntada ama isticmaalka caafimaadka.Haddii macmiilku haysto tiro ku filan, waanu soo dhawaynaynaa inaanu noo soo dirno waydiin.
Q5: Haddii aan dalbanno tuubada dhululubo pneumatic ahama-birta, usha piston ee leh birta aan fiicnayn?
A: Haa, usha piston waxay la socotaa 304 bir aan lahayn.
