DNT 6431 Aluminium PROFILE TUBE SYLINDER PNEUMATIC
Qalabka Aluminium Alloy Profile Aluminium tube dhululubo pneumatic ah: aluminium alloy 6063 T5
Dhererka caadiga ah waa 2000mm, haddii aad u baahan tahay dherer kale, fadlan si xor ah noogu soo wargeli.
Dusha Anodized: tube gudaha-15 ± 5μm dibadda tube-10 ± 5μm
Heshiisyada naqshadeynta FESTO, SMC, Airtac, Chelic iwm.
Sida waafaqsan heerka ISO 6430 ISO6431 VDMA 24562 ISO15552 iwm.
Waxaa loo isticmaalaa dhululubada caadiga ah, dhululubo is haysta, dhululubo mini, Dual Rod cylinder, Slide cylinder, Slide Table cylinder, Gripper iwm. Sidoo kale qaar ka mid ah dhululubada gaarka ah.
Halabuurka Kiimikada:
Halabuurka Kiimikada | Mg | Si | Fe | Cu | Mn | Cr | Zn | Ti |
0.81 | 0.41 | 0.23 | <0.08 | <0.08 | <0.04 | <0.02 | <0.05 |
Faahfaahin:
Xoogagga kacsanaanta (N/mm2) | Xoogga Wax-soosaarka (N/mm2) | Awoodda (%) | Adagnaanta Dusha | Saxnaanta Dhexroorka Gudaha | Qalafsanaanta Gudaha | Toosanaan | Qaladka Dhumucda |
Sb 157 | S 0.2 108 | S8 | HV 300 | H9-H11 | <0.6 | 1/1000 | ± 1% |
Dulqaadka Aluminium Alloy Tube:
DULMIGA TUBE ALUMINIUM | ||||||
Cabbirka Bore | Dulqaad | |||||
mm | H9 (mm) | H10 (mm) | H11 (mm) | |||
16 | 0.043 | 0.07 | 0.11 | |||
20 | 0.052 | 0.084 | 0.13 | |||
25 | 0.052 | 0.084 | 0.13 | |||
32 | 0.062 | 0.1 | 0.16 | |||
40 | 0.062 | 0.1 | 0.16 | |||
50 | 0.062 | 0.1 | 0.16 | |||
63 | 0.074 | 0.12 | 0.19 | |||
70 | 0.074 | 0.12 | 0.19 | |||
80 | 0.074 | 0.12 | 0.19 | |||
100 | 0.087 | 0.14 | 0.22 | |||
125 | 0.1 | 0.16 | 0.25 | |||
160 | 0.1 | 0.16 | 0.25 | |||
200 | 0.115 | 0.185 | 0.29 | |||
250 | 0.115 | 0.185 | 0.29 | |||
320 | 0.14 | 0.23 | 0.36 |
FAQ
Q1: Waa maxay 6063?
A: Heerkulka dhalaalka ee 6063 aluminium aluminium ka sarreeya 655 darajo, heerkulka extrusion ee 6063 profile aluminium waa 490-510 heerkulka usha, iyo 420-450 for extrusion foosto.Guud ahaan, qaabka heerkulka profile kasta oo extruded waa ka duwan yahay, laakiin malaha dhammaan Waa in kala duwan oo this: caaryada heerkulka 470-490, dhigay si waafaqsan xaaladdaada.
Q2: Waa maxay heerka DNT ee Sylinder Pneumatic Tube?
A: Waa heerka ISO6431.
Q3: Waa maxay dhererka caadooyinka aluminium aluminium ee cilinder hawada?
A: 2 Mitir ~ 2.5 Mitir.
Q4: Intee in le'eg ayay autoairku qaadanaysaa si ay u keento Extrusion Aluminium ee Silinders Pneumatic?
J: Autoair waxa ay awood u leedahay in ay ku keento noocyo kala duwan oo tuubo dhululubo pneumatic caadiga ah muddo 7 maalmood oo shaqo gudahood.
Haddii loo baahan yahay cabbir gaar ah, wakhtiga hogaanka wuxuu qaadan doonaa ku dhawaad 15 maalmood.(kuma jiraan wakhtiga furitaanka caaryada).
Q5: Miyaad diyaar u tahay inaad keento muunado tuubo aluminium ah oo la soo saaray?
A: Haa, Autoair waxay awood u leedahay inay bixiso tuubo aluminium ah oo la sii daayay si aad u hubiso tayada, Caadi ahaan, muunadku waa bilaash si loo badbaadiyo kharashkaaga, Laakiin waxay u baahan doontaa kharashka qalabaynta haddii cabbirka tuubada caadada ah.